Removal

1. EJECT MAP DISC

(a) Turn the ignition switch on (ACC).

(b) Push the "CLOSE" button.

(c) Touch "MAP EJECT" on the navigation screen to eject the map disc.

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) (See page IP-24)

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See page IP-24)

4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (See page IP-24)

5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (See page IP-25)

6. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle) (See page IP-25)

7. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle) (See page IP-25)

8. REMOVE UPPER CONSOLE REAR PANEL SUBASSEMBLY (for Automatic Transaxle) (See page IP-26)

9. REMOVE UPPER CONSOLE REAR PANEL SUBASSEMBLY (for Manual Transaxle) (See page IP-26)

10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (See page IP-27)

11. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (See page IP-27)

12. REMOVE NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY

(b) Pull the navigation receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.

(c) Disconnect each connector and remove the navigation receiver with heater control panel assembly.

13. REMOVE RADIO NO. 1 BRACKET

(a) Remove the 5 bolts and radio No. 1 bracket.

14. REMOVE RADIO NO. 2 BRACKET

(a) Remove the 5 bolts and radio No. 2 bracket.

15. REMOVE NAVIGATION RECEIVER ASSEMBLY

(a) Remove the navigation receiver assembly as shown in the illustration.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment