Remove No Instrument Cluster Finish Panel Garnish

(a) Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.

29. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

(a) Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.

30. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)

(a) Disengage the 6 claws and the 3 clips, and then remove the floor shift position indicator housing sub-assembly.

(b) with Seat Heater System:

(1) Disconnect each connector.

31. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)

(a) Open the lid of the upper console panel.

(b) Apply protective tape to the area shown in the illustration.

(c) Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.

c:3:Clamp

B133996E01

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment