When the vehicle turns right or left at an intersection the current vehicle position mark may be displayed on a nearby parallel road

(4) When the vehicle is carried, such as on a ferry, and the vehicle itself is not running, the current vehicle position mark may be displayed in the position where the vehicle was until a measurement can be performed by GPS.

(5) When the vehicle runs on a steep hill, the current vehicle position mark may deviate from the correct position.

(6) When the vehicle makes a continuous turn of 360, 720, 1,080, etc. degrees, the current vehicle position mark may deviate from the correct position.

(7) When the vehicle moves erratically, such as constant lane changes, the current vehicle position mark may deviate from the correct position.

(8) When the ignition switch is turned on (ACC or IG) on a turntable before parking, the current vehicle position mark may not point in the correct direction. The same will occur when the vehicle comes out of parking.

(9) When the vehicle runs on a snowy road or a mountain path with the chains installed or using a spare tire, the current vehicle position mark may deviate from the correct position.

(10)When a tire is changed, the current vehicle position mark may deviate from the correct position. HINT:

• Diameter of the tire may change, causing a speed sensor error.

• Performing the "tire change" in calibration mode will allow the system to correct the current vehicle position faster.

Diagnosis MENU

Service Cheek

Display Check

Navigation Check

Bluetooth TEL Check

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment