Installation After Painting Process

(a) ANTI-RUST AGENT (WAX) APPLICATION

(1) To preserve impossible to paint areas from corrosion, always apply sufficient anti-rust agent (wax) to the inside of the hemming areas of the doors and hood, and around the hinges, or the welded surfaces inside the box-shaped cross sections of the side members, body pillars, etc.

6. ANTI-RUST TREATMENT BY PAINTING

REFERENCE:

Painting prevents corrosion and protects the sheet metal from damage. In this section, anti-chipping paint only for anti-corrosion purposes is described.

(a) ANTI-CHIPPING PAINT

(1) To prevent corrosion and protect the body from damage by flying stones, etc., apply anti-chipping paint to the rocker panel, wheel arch areas, balance panel, etc.

HINT:

Depending on the model or the application area, there are cases where the application of anti-chipping paint is necessary before the second coat or after the top coat

• Apply the anti-chipping paint after the top coat.

• Apply the anti-chipping paint before the second coat.

• Apply the anti-chipping paint after the top coat.

Anti-Chipping Paint

Top Coat Second Coat Under Coat (ED Primer) Steel Metal

• Apply the anti-chipping paint before the second coat.

Anti-Chipping Paint

Top Coat Second Coat Under Coat (ED Primer) Steel Metal

Top Coat Second Coat

Anti-Chipping Paint

Under Coat (ED Primer) Steel Metal

Top Coat Second Coat

Anti-Chipping Paint

Under Coat (ED Primer) Steel Metal

F10024A

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment