Jam Protection Function
A jam protection function automatically stops the power window and moves it downward if a foreign object gets jammed in the door window during one-touch auto up operation.
The operation of the jam protection function is described below.
|
Door window distance from fully closed position |
Operation |
|
200 mm (7.87 in.) or more |
Down operation of 50 mm (1.97 in.) or one second. |
|
200 mm (7.87 in.) or less |
Down operation until door window operation of 200 mm (7.87 in.) is reached or five seconds. |
The worm gear and Hall IC in the power window motor assembly are used to enable the power window jam protection.
The worm gear and Hall IC in the power window motor assembly are used to enable the power window jam protection.
- Worm Gear
01YBE60TE
The Hall IC converts the changes in the magnetic flux that occur through the rotation of the worm gear into pulse signals and outputs them to the power window ECU.
To control the jam protection function, the ECU determines the amount of movement and jamming of the window glass based on the pulse signals from the Hall IC.
^ Judgment of Movement and Jamming •
Hall IC1 Signal
Amount of Movement I of Motor 1 Revolution Sensor
Normal
Change in Amount of Movement of Motor 1 Revolution Sensor
Jammed
232BE34
Was this article helpful?
Do It Yourself Car Diagnosis
Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.
Related Posts
Responses
-
awet8 years ago
- Reply
-
ADELGRIM2 years ago
- Reply