Attach Engine Sliding Device To Engine Hanger

(a) Remove the 4 bolts and No. 2 cylinder head cover.

(b) Disconnect the PCV hoses from the cylinder head cover.

Toyota 12281 15050

(c) Install the 2 engine hangers in the correct direction. Engine hanger part No.:

1ZZ-FE

Front: 12281-22021

Rear: 12281-15040 or 12281-15050

Bolt: 91512-B1016

2ZZ-GE

Front: 12281-88600 Rear: 12282-88600 Bolt: 91512-61020

(d) Attach the engine sling device to the engine hangers. CAUTION:

Do not attempt to hang the engine by hooking the chain to any other part.

29. REMOVE REAR ENGINE MOUNTING

(a) Remove the through boll and rear engine mounting insulator.

(b) Remove the 3 bolts and rear engine mounting bracket.

30. REMOVE ENGINE AND TRANSAXLE ASSEMBLY

(a) Remove the LH engine mounting through bolt and nut.

Remove the 4 bolts, 2 nuts and RH engine mounting insulator.

Remove the 5 bolts, 2 nuts and RH engine mounting insulator.

(d) Lower the engine out of vehicle siowly and carefully, and raise the vehicle.

HINT:

Make sure the engine is clear of all wiring, hoses and cables.

(e) Place the engine and transaxle assembly onto the stand. 31. SEPARATE ENGINE AND TRANSAXLE

(C56 M/T: See page MX-4) (C60 M/T: See page MX-4) (U240E A/T: See page AX-31) (U341E A/T: See page AX-31)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment