Disassembly

1. REMOVE NO. 2 FUEL SUCTION SUPPORT

{a} Using a smail screwdriver, remove the No. 2 fuel suction support.

(b) Remove the rubber cushion.

2. REMOVE NO. 1 FUEL SUCTION SUPPORT

{a) Disconnect the fuei sender gauge connector and earth piate.

(b) Using a small screwdriver, remove the No. 1 fuel suction support.

NOTICE:

Do not damage the fuel suction support and fuel suction piate.

(c) Disconnect the fuel pump harness from the No. 1 fuel suction support and fuel pump.

3. REMOVE VAPOR PRESSURE SENSOR

Pull off the joint clip and remove the vapor pressure sensor from No. 1 fuel suction support.

4. REMOVE FUEL PRESSURE REGULATOR

Pull out the fuel pressure regulator and O-ring from the fuei filter.

5. REMOVE FUEL PUMP

Remove the pump from the fuel fiiter.

SF-13

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment