Ensure the fine lapping compound is completely washed off after rubbing

(c) Check again the braking effect of the synchronizer ring.

(d) Using a feeler gauge, measure the clearance between the synchronizer ring back and gear spline end. Minimum clearance: 0.5 mm (0.020 in.) !f the clearance is less than the minimum, replace the synchronizer ring, and apply a small amount of the fine lapping compound on gear cone. NOTICE:

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment