Front Speed Sensor Components

Resin Clip

Resin Clip

j 8-0 (82, 71 in.ibfj ( ^
Toyota Celica Front Speed Sensor Diagram
Front Speed Sensor

pN-ni (kgf-cm, ft ibi) | : Specified torque f CIS /SS

" ■ ..

\

\ x

\

n

-

1. DISCONNECT SPEED SENSOR CONNECTOR

(a) Remove the front wheel.

(b) Remove the fender liner.

(c) Disconnect the speed sensor connector and resin clip.

liSlitfwt?^ x

2. REMOVE SPEED SENSOR

(a) Remove the 2 clamp bolts holding the sensor harness from the body and shock absorber. Torque: 8.0 N-m (82 kgf cm, 71 tn. lbf)

(b) Remove the speed sensor installation bolt from the steering knuckle.

At the time of installation, please refer to the following item. There are no foreign objects on the sensor or the part of the knuckle to which the sensor is to be installed. The sensor is installed flat against the knuckle when you tighten the bolt.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment