1

Battery faulty.

Inspection start by using self diagnostic mode: Enter into the self diagnostic mode.

If operating door control receiver in the order of 1 through 2, the mode turns to diagnostic mode.

(1) Insert the key plate in the ignition key cylinder and pull out. then insert it again and turn ignition switch OFF ON OFF once within 5 seconds after pulling out.

(2) After completing the procedure within 30 seconds, turn the ignition switch OFF ON --ยป OFF 9 times. HINT;

In the case that either of {1) and (2) conditions is not satisfied, transfer to normal mode <Relerence>

When completing self diagnostic mode, turn the ignition switch ON.

LOCK and UNLOCK operation is not performed under the self diagnostic mode.

Key plate not inserted-

Key ptate _ l inserted Ignition switch ON -

within.

within.

within.

within.

1st time
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment