If Necessary Replace Input Shaft Front Bearing And Oil Seal

(a) Using SST, remove the input shaft front bearing. SST 09612-65014

How Remove Oil Sea

(b) Using a screwdriver, remove the oil sea!.

Sst 09951 00560

(c) Using SST and a hammer, drive in a new oil seal.

SST 09950-60010 (09951-00360), 09950-70010

(09951-07150) Drive In depth: 15.8 ± 0.2 mm (0.622 ± 0.008 in.)

(d) Coat the lip of the oil seal with MP grease.

09950 60010

(e) Using SST and a press, install a new input shaft front bearing.

SST 09950-60010 (09951-00400), 09950-70010

(09951-07150) Drive in depth: 0 - 0.3 mm (0 - 0.012 in.) NOTICE:

Be sure to install a new bearing in the correct direction, as shown in the illustration.

Dibujo Nadie Eterno

5. IF NECESSARY, REPLACE OUTPUT SHAFT FRONT BEARING AND OUTPUT SHAFT COVER

(a) Remove the bolt and bearing lock plate.

(b) Using SST, pull out the output shaft front bearing. SST 09308-00010

(c) Remove the output shaft cover.

(d) Install the output shaft cover. NOTICE:

Install the output shaft cover projection into the case side hollow.

(e) Using SST and a press, install a new output shaft front bearing.

SST 09950-60010 (09951-00560), 09950-70010 (09951-07150)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment