Inspection

1. INSPECT CLUTCH DISC FOR WEAR OR DAMAGE

Using vernier calipers, measure the rivet head depth. Minimum rivet depth: 0.3 mm (0,012 in.)

If necessary, replace the clutch disc.

006033

2. INSPECT CLUTCH DISC RUNOUT

Using a dial indicator, check the disc runout. Maximum runout: 0.8 mm (0.031 in.)

If necessary, replace the clutch disc runout.

3. INSPECT FLYWHEEL RUNOUT

Using a dial indicator, check the flywheel runout.

Maximum runout: 0,1 mm (0.004 in.) if necessary, replace the flywheel.

4. INSPECT DIAPHRAGM SPRING FOR WEAR

Using vernier calipers, measure the diaphragm spring for depth and width of wear. Maximum:

A (Depth): 0.5 mm (0.020 in.) B (Width): 6.0 mm (0.236 In.)

If necessary, replace the clutch cover.

5. INSPECT RELEASE BEARING

Turn the bearing by hand while applying force in the axial direction. HINT:

The bearing is permanently lubricated and requires no cleaning or lubrication.

If necessary, replace the release bearing.

Flywheel Side'

Flywheel Side'

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment