Install Rectifier End Frame

(a) Place the generator washer on the rotor.

(b) Using a 29 mm socket wrench and press, slowly press in the rectifier end frame.

(c) Install the wire clip and 4 nuts. Torque:

Nut A 4.5 Nm (46 kgf-cm, 40 in.-lbf) Nut B 5.4 Nm (55 kgf-cm, 48 in. lbf)

(c) Install the wire clip and 4 nuts. Torque:

Nut A 4.5 Nm (46 kgf-cm, 40 in.-lbf) Nut B 5.4 Nm (55 kgf-cm, 48 in. lbf)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment