2000 Celica Throttle Body Install

1. INSTALL THROTTLE BODY

Install a new gasket on the intake manifold, as shown in the illustration.

Install a new gasket on the intake manifold, as shown in the illustration.

(c) Install the throttle body with the 2 bolts and 2 nuts. Torque:

1ZZ-FE: 21 N-m (210 kgt cm, 15 ft-lbf) 2ZZ-GE: 22 N m (220 kgfcm, 16 ft-lbf)

(d) Connect the 2 water bypass hoses to the throttle body.

Install the No. 2 water by-pass pipe with the 2 bolts.

(f) Connect the IAC valve connector.

(g) Connect the throttle position sensor connector.

(h) Connect the PCV hose to throttle body.

2. INSTALL AIR CLEANER HOSE AND CAP WITH MAF METER

3. INSTALL NO. 2 CYLINDER HEAD COVER

4. FILL RADIATOR WITH ENGINE COOLANT

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment