## Mm in Maximum oil clearance mm in

If the oil clearance is greater then maximum, replace the bearings. If necessary, replace the crankshaft.

if using a standard bearing, replace it with one having the same number. If the number of the bearing cannot be determined, select the correct bearing by adding together the numbers imprinted on the cylinder block and crankshaft, then selecting the bearing with the same number as the total. There are 4 sizes of standard bearings, marked "1", "2","3- and "4" accordingly.

 ' -- - Total number " ": Number mark Cylinder block (A) + Crankshaft (B) 0-2 3-5 6-8 9-11 Use bearing "V "2" "3* "4"

EXAMPLE-. Cylinder block "4" (A) + Crankshaft "3" (B) = Total number 7 {Use bearing "3")

EXAMPLE-. Cylinder block "4" (A) + Crankshaft "3" (B) = Total number 7 {Use bearing "3")

Standard bearings selection chart

If using standard bearing, replace it with one having the same number. If the number of the bearing cannot be determined, refer to the following table to select bearing.

Standard bearings selection chart

 Cylinder block Number mark Crank shaft number mark 0 1 2 3 4 5 0 t 1 1 2 2 2 1 1 1 2 2 2 3 2 1 2 2 2 3 3 3 2 2 2 3 3 3 4 2 3 3 3 4 4 5 3 3 n 4 4 4 6 3 3 4 4 4 5

EXAMPLE: Cylinder block "4", Crank shaft "3", Use bearing "3"

EXAMPLE: Cylinder block "4", Crank shaft "3", Use bearing "3"

## Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook