Reassembly

1. INSTALL BEARING

(a) Using SST and a press, install a new bearing to the steering knuckle.

SST 09950-60020 (09951-00730), 09950-70010 (09951-07150)

(b) Using snap ring pliers, install a new snap ring.

2. INSTALL DUST COVER

Place the dust cover and using a torx socket (T30), install the 3 bolts.

3. INSTALL FRONT AXLE HUB

Using SST and a press, install the axle hub.

SST 09608-32010, 09950-60010(09951-00550) 09950-70010 (09951-07150)

4. INSTALL LOWER BALL JOINT

(a) Install the lower bail joint and tighten the nut. Torque: 103 N m (1,050 kgf cm, 76 ft. Ibf)

(b) Install a new cotter pin.

If the holes for the cotter pin are not aligned, tighten the nut further up to 60°.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment