(a) Clean the contacting surface of the axle hub and a new ABS speed sensor.


Do not allow any foreign matter sticking to the sensor rotor.

(b) Place the ABS speed sensor on the axle hub so that the connector is set at the bottom under the on-vehicle condi-tion.

(c) Using SST and a press, install a new ABS speed sensor to the axie hub. SST 09214-76011 NOTICE:

Do not tap the speed sensor with a hammer directly. ♦ Check that there should be no foreign matter on the speed sensor detection portion. Press in the ABS speed sensor straightly and slowly.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment