Reassembly

1. INSTALL COIL SPRING

(a) Using SST, compress the coil spring.

SST 09727-30021 (09727-00010, 09727-00021, 09727-00031)

NOTICE:

Do not use an impact wrench, it will damage the SST.

(b) insert the coil spring to the shock absorber. HINT:

Fit the lower end ol the coil spring into the gap of the spring lower seat.

2. INSTALL SPRING BUMPER AND SUSPENSION SUPPORT

3. INSTALL SPRING BRACKET

(a) Set the upper insulator to the spring bracket.

(b) Position the spring bracket with upper insulator as shown in the illustration.

(c) Install the cushion and washer.

(d) Temporarily tighten the center nut. (e> Remove the SST,

SST 09727-30021 (09727-00010, 09727-00021, 09727-00031) (f) Recheck the direction of the spring bracket.

(g) Using a 6 mm hexagon wrench to hold the piston rod, tighten the nut.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment