Reassembly

1. INSTALL LOWER INSULATOR ONTO SHOCK ABSORBER

2. INSTALL SPRING BUMPER TO PISTON ROD

3. INSTALL COIL SPRING

(a) Using SST, compress the cot! spring.

SST 09727-30021 (09727-00010, 09727-00021, 09727-00031)

NOTICE:

Do not use an impact wrench. It will damage the SST.

(b) Install the coil spring to the shock absorber. HINT:

Fit the lower end of the coit spring into the gap of the spring lower seat.

(c) Install the upper insulator as shown in the illustration.

(d) Install the spring seat to the shock absorber with the "A" mark facing to the outside of the vehicle.

(e) Install the dust seal and suspension support.

(f) Using SST to hold the suspension support, install a new nut.

SST 09729-22031

SST 09727-30021 (09727-00010,09727-00021, 09727-00031)

MP Grease

MP Grease

(h) Apply MP grease into {he suspension support.

(i) Install the cap.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment