Reassembly

Reassembly is in the reverse order of disassembly. (See page MX-12) NOTICE:

When working with FIPG material, you must observe the followings.

Using a razor blade and gasket scraper, remove all old FIPG material from the gasket surfaces.

Thoroughly clean all components to remove all loose material.

Clean both sealing surfaces with a non-residue solvent.

Apply FIPG in an approx. 1 mm (0.04 in.) wide bead along the sealing surface.

Parts must be assembled within 10 minutes of application. Otherwise, the FIPG material must be removed and reapplied.

HINT:

Coat all of the sliding and rotating surfaces with gear oil before reassembly.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment