Tire And Wheel Inspection

1. INSPECT TIRE

(a) Check the tires for wear and proper inflation pressure. Cold tire inflation pressure 1ZZ-FE engine models:

Tire size

From kPa (kg[.'cma, psi)

Rear kPa (kgf'ctn2, psi)

195/60R15 88H P195/6GR55 87H

210 (2.t, 29)

2!0 (2.29)

2ZZ-GE engine models:

Tire size

Front KPa (kgl/cm2, psi)

Rear kPa (kgf/crn'-', psi)

20 5/5 5 R15 87V P205:'55R15 87V 205/50R1687V

220 (2.2, 32)

220(2 2. 32)

(b) Using a dial indicator, check the tire runout. Tire runout: 1.0 mm (0.039 in.) or less

2. ROTATING TIRES

HINT:

See the illustration for where to rotate each tire when you include the spare tire in the rotation and when you do not.

Front

i

L.„J -—- I. ' I

\

V.

( 3-—*~L. 1

N roaj67

FÛ8M0

If the rotating direction is specified, do not exchange the tires between the right and left.

Backlash: Deviation:

3. INSPECT WHEEL BALANCE

(a) Check and adjust the Off-the-car balance.

(b) If necessary, check and adjust the On-tbe-car balance. Imbalance after adjustment: 8.0 g (0.018 lb) or less

Backlash: Deviation:

P02SÎ57

4. CHECK WHEEL BEARING LOOSENESS

(a) Using a dial indicator, check the backlash near the center of the axle hub.

If the backlash exceeds the maximum, replace the bearing.

(b) Using a dial indicator, check the deviation at the surface of the axle hub outside the hub boll.

Maximum: 0.07 mm (0.0028 in.) If the deviation exceeds the maximum, replace the axle hub.

5. CHECK FRONT SUSPENSION FOR LOOSENESS

6. CHECK STEERING LINKAGE FOR LOOSENESS

7. CHECK BALL JOINT FOR LOOSENESS

8. CHECK SHOCK ABSORBER WORKS PROPERLY Check that oil leaks

* Check mounting bushings for wear Bounce front and rear of the vehicle

Rav4 Oil Leak
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment