Vehicle Speed Sensor Onvehicle Repair

1. REMOVE BATTERY

2. REMOVE ECM AND ECM CASE

3. REMOVE ECM BRACKET

Location 1kz Speed Sensor Photo

4. DISCONNECT VEHICLE SPEED SENSOR CONNECTOR

5. REMOVE VEHICLE SPEED SENSOR ASSEMBLY

(a) Remove the bolt and vehicle speed sensor assembly.

(b) Remove the clip and speedometer driven gear from the vehicle speed sensor.

(c) Remove the O-ring from the vehicle speed sensor.

Vehicle Speed Sensor Driven Gear

INSTALL VEHICLE SPEED SENSOR ASSEMBLY

Coat a new O-ring with ATF and install it to the vehicle speed sensor.

Install the speedometer driven gear to the vehicle speed sensor with clip.

Install the vehicle speed sensor assembly with the bolt. Torque: 5.5 N-m (56 kgfcm, 49 in. Ibf) CONNECT VEHICLE SPEED SENSOR CONNECTOR INSTALL ECM BRACKET Torque:

Bolt: 18 N-m (185 kgf cm, 13 ft lbf) Nut: 12 N-m (120 kgf cm, 9 ft-lbt) INSTALL ECM AND ECM CASE Torque: 6.9 N-m (70 kgf cm, 61 in. Ibf) INSTALL BATTERY

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment