Ac

_AIR CONDITIONING SYSTEM - Compressor

(b) Install SST to the pressure plate. SST 07112-66040

(c) Using SST and the socket, remove the pressure plate. SST 07112-76060

(d) Remove the shims from the pressure plate.

2. REMOVE ROTOR

(a) Using SST, remove the snap ring. SST 07114-84020

2. REMOVE ROTOR

(a) Using SST, remove the snap ring. SST 07114-84020

(b) Using a plastic hammer, tap the rotor off the shaft. NOTICE: Be careful not to damage the pulley when tapping on the rotor.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment