Components

REMOVAL OF BACK WINDOW GLASS

1. REMOVE FOLLOWING PARTS:

(a) Rear seat cushion and back (See page BO-66)

(b) Quarter trim panel (See step 3 on page BO-42)

(c) Front and rear shoulder belt anchor bolts and guides.

(d) Roof side inner garnish (See step 6 on page BO-43)

2. DISCONNECT DEFOGGER WIRE CONNECTORS

3. REMOVE HIGH MOUNT STOP LIGHT AND COVER

(a) Pry loose the cover with your hand.

(b) Remove two bolts and the light.

(c) Disconnect the connector.

4. REMOVE PACKAGE TRAY TRIM

Pull the trim forward to remove it.

5. REMOVE ROOF HEADLINING REAR TRIM

Using a screwdriver, pry loose the clips to remove the trim.

HINT: Tape the screwdriver tip before use.

6. REMOVE BACK WINDOW MOULDINGS (See steps 1 to 2 on pages BO-29 to 30)

7. REMOVE BACK WINDOW GLASS

Remove the glass in the same manner as windshield. (See step 7 on page BO-34)

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment