1. DISCONNECT BATTERY CABLE FROM NEGATIVE
CAUTION: Work must be started after approx. 20 seconds or longer from the time the ignition switch is turned to the "LOCK" position and the negative (-) terminal cable is disconnected from the battery.
2. REMOVE STEERING WHEEL
3. REMOVE STEERING COLUMN COVER
Remove four screws and column covers.
4. REMOVE CONSOLE BOX
(a) Remove console upper panel.
(b) Using a screwdriver, remove four screw caps.
HINT: Tape the screwdriver tip before use.
(c) Remove four screws and two bolts.
(d) Disconnect the connectors and remove the console box.
Was this article helpful?