Remove two bolts and rear seat side hinge.
(b) Using the screwdriver, remove speaker grille.
HINT: Tape the screwdriver tip before use.
(c) Remove six screws.
(d) Using the screwdriver, pry loose the clips and remove the quarter trim panel.
4. REMOVE FRONT SHOULDER BELT ANCHOR BOLT
5. REMOVE REAR SHOULDER BELT ANCHOR BOLT
6. REMOVE ROOF SIDE INNER GARNISH
(a) Remove the screw and the hook.
(b) Remove the three screws.
(c) Using the screwdriver, pry loose the clips.
(d) Remove the roof side inner garnish.
7. REMOVE QUARTER WINDOW GLASS AND MOULDING
(a) Remove three nuts.
(b) Using a knife, cut loose the adhesive.
(c) Remove the glass.
NOTICE: Do not damage the body.
Was this article helpful?
You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.