Check And Adjustment Of Clutch Pedal

1. CHECK THAT PEDAL HEIGHT IS CORRECT AS SPECIFIED

2. IF NECESSARY, ADJUST PEDAL HEIGHT

(a) Loosen the lock nut and turn the adjusting bolt until the height is correct.

(b) Tighten the lock nut.

(c) After adjusting the pedal height, check the pedal freeplay.

3. CHECK THAT PEDAL FREEPLAY IS CORRECT AS SPECIFIED

Push in on the pedal until initial clutch resistance is felt.

Pedal freeplay: 5 - 15 mm (0.20 - 0.59 in.) (Push rod play at pedal: 1-5 mm (0.04 - 0.20 in.)]

4. IF NECESSARY, ADJUST PEDAL FREEPLAY

(a) Loosen the lock nut and turn the push rod until the freeplay is correct.

(b) Tighten the lock nut.

(c) After adjusting the pedal freeplay, check the pedal height.

5. CHECK PEDAL OPERATION

While gently depressing and releasing the pedal, check that engagement and disengagement is smooth.

NOTE: With a pedal stroke of 125 - 135 mm (4.92 -5.31 in.), the pedal should return in 3 - 4 seconds.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment