Clutch Release Cylinder

COMPONENTS

-Bleeder Plug 1110 (8. iTT]

REMOVAL OF RELEASE CYLINDER

1. DISCONNECT FLEXIBLE HOSE

Using SST, disconnect the union. SST 09751-36011

2. REMOVE RELEASE CYLINDER

(a) Remove the two bolts.

(b) Pull out the release cylinder.

DISASSEMBLY OF RELEASE CYLINDER

1. PULL OUT PUSH ROD

2. REMOVE BOOT

3. PULL OUT PISTON AND SPRING

ASSEMBLY OF RELEASE CYLINDER

1. COAT PISTON WITH LITHIUM SOAP BASE GLYCOL GREASE, AS SHOWN

2. INSERT SPRING AND PISTON INTO CYLINDER

3. INSTALL BOOT AND INSERT PUSH ROD

INSTALLATION OF RELEASE CYLINDER

1. INSTALL RELEASE CYLINDER

2. CAREFULLY CONNECT FLEXIBLE HOSE

3. BLEED CLUTCH SYSTEM (See page CL-3)

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment