Inspect Motor Operation

(a) Connect the positive (+) lead from the battery to terminal 1. Connect the negative {-) lead to terminal

(b) Check that the motor operates.

CAUTION: These tests must be performed quickly (within 3-5 seconds) to prevent the coil from burning out.

If operation is not as specified, replace the motor.

WIPERS AND WASHERS Troubleshooting

Problem

Possible cause

Remedy

Page

Front

Rear

Wipers do not operate or return to off position

WIPER fuse blown Wiper motor faulty Wiper switch faulty Wiring or ground faulty

Replace fuse and check for short Check motor Check switch Repair as necessary

BE-25

BE-25

Wipers do not operate in INT position

Wiper relay faulty Wiper switch faulty Wiper motor faulty Wiring or ground faulty

Check relay Check switch Check motor Repair as necessary

BE-23 BE-22 BE-24

BE-25 BE-25 BE-25

Washers do not operate

Washer hose or nozzle clogged Washer motor faulty Wiper switch faulty Wiring faulty

Repair as necessary Replace motor Check switch Repair as necessary

BE-22

BE-25

s

Tflfl

2

0

1_

CS

TT

12

T*

0

ESI

atom

C.b1

Front Wiper and Washer Switch

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment