Inspection Of Headlight Retainer Relay

1. INSPECT HEADLIGHT CIRCUIT OPERATION

Connect the positive (+} leads from the battery to termv nals 4 and 7. Connect the negative (-) lead to terminal 2. Connect the 3.4W test bulb between terminal 8 and positive (+) lead from the battery.

(a) Disconnect the positive (♦) lead from the terminal 7. Check that the test bulb is lighting.

(b) Connect the negative (-) lead to the terminal 6. Check that the test bulb does not light.

If operation is not as specified, replace the relay.

Light Retainer Relay Toyota Land Cruiser

2. INSPECT TAILLIGHT CIRCUIT OPERATION

Connect the positive (+) leads from the battery to terminals 4 and 7. Connect the negative (-) lead to terminal 3. Connect the 3.4W test bulb between terminal 1 and positive (+) lead from the battery.

(a) Disconnect the positive (+) lead from the terminal 7. Check that the test bulb is lighting.

Headlamp Retainer Relay

(b) Connect the negative {-) lead to the terminal 6. Check that the test bulb does not light.

If operation is not as specified, replace the relay.

Fog Light Switch

Was this article helpful?

0 -1
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • rose
    What is a toyota headlight retainer?
    9 years ago

Post a comment