1. INSTALL SUPPORT MEMBER
(a) Put upper stopper on member.
(b) Install the support member and lower stopper with nuts.
NOTE: Hand tighten the nuts.
2. INSTALL DIFFERENTIAL CARRIER BOLT
Install the differential carrier bolts.
3. INSTALL DIFFERENTIAL SUPPORT MEMBER MOUNTING BOLT NO. 1
Install the No. 1 mounting bolts to the support member with nuts. Torque the nuts.
4. TIGHTEN SUPPORT MEMBER NUTS
Torque the nuts.
5. CONNECT DRIVE SHAFT
6. INSTALL STABILIZER BAR BRACKET (See page RA-49)
Was this article helpful?