Installation Of Parking Lock Pawl

1. INSTALL PARKING LOCK PAWL AND PARKING PAWL PIVOT PIN

2. INSTALL PIVOT SPRING

3. INSTALL PARKING LOCK PAWL BRACKET

(a) Push lock rod fully forward.

(b) Install two bolts finger tight.

(c) Check that the parking lock pawl operates smoothly.

(d) Torque the bolts.

4. INSTALL VALVE BODY (See page AT-34)

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment