Installation Of Steering Column Assembly

1. PLACE COLUMN AND SHAFT IN INSTALLED POSITION

2. INSTALL COLUMN BRACKET MOUNTING NUTS BY HAND

INSTALL STEERING COLUMN HOLE COVER PLATE

Tighten the bolts.

TORQUE TWO COLUMN BRACKET MOUNTING NUTS

5. INSTALL COMBINATION SWITCH AND COLUMN COVER

6. INSTALL AIR DUCT AND INSTRUMENT LOWER PANEL

1JL \'l

(C)— kf&/;

(a)

(jfr a

'-(b)

7. INSTALL INTERMEDIATE SHAFT

(a) Install the column side first.

(b) Install the rack housing side.

(c) Install the two bolts and torque them. Torque: 350 kg-cm (25 ft-lb, 34 N m)

8. CONNECT NEGATIVE CABLE TO BATTERY

9. INSTALL STEERING WHEEL

(a) Position the front wheels straight ahead and install the steering wheel in the neutral position.

(b) Tighten the nut.

(c) Install the steering wheel pad.

Nippondenso

Borroughs

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment