Power Window Motor Inspection Of Power Window Motor

1. INSPECT CIRCUIT BREAKER OPERATION

(a) With the window in the full closed position, hold the power window switch at "UP" and check that there is a circuit breaker operation noise within 4 to 40 seconds.

(b) With the window in the fully closed position, hokJ the switch at "DOWN" and check that the window begins to descend within 60 seconds.

2. INSPECT MOTOR OPERATION

{a) Connect the positive (+) lead from the battery to terminal 1 and connect the negative (—) lead to the terminal 2, and check that the motor turns clockwise.

(b) Connect the positive (♦) lead from the battery to terminal 2 and connect the negative (-) lead to the terminal 1, and check that the motor turns counterclockwise.

If operation is not as specified, replace the motor.

CAH?A

DOOR LOCK CONTROL SYSTEM Door Lock Control Switch

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment