Preparation of disassembly

1. REMOVE DIFFERENTIAL (Seepage RA-20)

2. DISASSEMBLE DIFFERENTIAL CASE FROM CARRIER (See page RA-25)

3. DISASSEMBLE SIDE BEARING (See page RA-26)

NOTE: If the side gear or clutch member has been replaced, be sure to replace the thrust washer contacting this part. Any disassembled part that is to be reused must be reassembled to its former location.

COMPONENTS

DISASSEMBLY OF LIMITED SLIP DIFFERENTIAL

1. PUT MATCHMARKS ON CASE AND CASE COVER

2. CHECK CASE COVER MARKS AND CLUTCH MEMBER RH, LH SET NUMBER

Adjusting Washer

Clutch Member

-Pinion Gear

Clutch Member RH Clutch Member LH

Thrust Washer No. 2

1 Clutch Member ! Thrust Washer

Adjusting Washer Thrust Washer No. 3

kg cm »Mb. N-m)l : Specified torque D,f,crent,al t Non-reusable part fr Precoated part

Adjusting Washer

Side Gear Pn

Thrust Washer No. 2 Thrust Washer No. 3

Clutch Member Thrust Washer

Number

Member Number

24914

Number

3. REMOVE CASE BOLTS AND CASE COVER WITH SIDE GEAR

NOTE: Case cover bolts have been treated with retaininj compound making it difficult to loosen them. Removal will be made easier by heating the assembly to around 150 *C (302° F) in an oil heater or similar means.

Adjusting Washer

RA0M8

4. REMOVE FOLLOWING PARTS FROM CASE COVER:

(a) Clutch member thrust washer

(e) Adjusting washer

5. REMOVE FOLLOWING PARTS FROM DIFFERENTIAL CASE:

(a) Clutch member RH with pinion gear

(b) Clutch member spring

(c) Clutch member LH

(d) Side gear and clutch member thrust washer

(g) Adjusting washer

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • ulla-maj
    How to check and rebuild a 1985 supra limited slip differential rebuilding instructions?
    7 years ago

Post a comment