Removal Of Cylinder

1. DISCONNECT BRAKE HOSE FROM BRAKE TUBE AND CYLINDER

(a) Using SST and a spanner, disconnect the brake tube from the hose.

SST 09751-36011

(b) Use a container to catch the brake fluid.

(c) Remove the clip from brake hose.

(d) Disconnect the brake hose from the cylinder.

Toyota Carina Brake Cylinder

2. REMOVE CYLINDER

(a) Hold the sliding bushing and unscrew the cylinder installation bolt.

(b) Lift up and push out the cylinder from the torque plate pin.

3. REMOVE FOLLOWING PARTS:

(a) Anti-squeal shim

(b) Brake pads

(c) Anti-rattle springs

(d) Pad guide plates

(e) Pad support plate

Celica Sliding Bushings Brake

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment