Replacement Of Front Oil Seal Components

1997 Rav4 Oil Seals

KA0075

1. REMOVE DIFFERENTIAL (Seepage RA-20)

2. REMOVE COMPANION FLANGE (See step 10 on page RA-24)

3. REMOVE OIL SEAL

(a) Using SST, remove the oil seal from the housing. SST 09308-10010

(b) Remove the oil slinger.

4. REMOVE FRONT BEARING AND BEARING SPACER (See step 12 on page RA-25)

5. INSTALL NEW BEARING SPACER AND FRONT BEARING

(a) Install a new bearing spacer on the shaft.

(b) Install the front bearing on the shaft.

t Non-reusable part

RA033S

KA0075

Oil Slinger-

6. INSTALL OIL SLINGER AND NEW OIL SEAL

(a) Install the oil slinger facing as shown.

(b) Using SST, drive in a new oil seal. SST 09316-60010

(c) Apply MP grease to the oil seal lip.

7. INSTALL COMPANION FLANGE (See step 12 on page RA-34)

8. CHECK FRONT BEARING PRELOAD (See step 13 on page RA-35)

9. CHECK DEVIATION OF COMPANION FLANGE (See step 14 on page RA-35)

10. STAKE DRIVE PINION NUT

11. INSTALL DIFFERENTIAL (Seepage RA-36)

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment