Adjustment

With the brake pedal depressed, shift while holding the shift lever knob button in. (The ignition switch must be in ON position.) Shift while holding the shift lever knob button in.

/VfV Shift normally

C95423

1. INSPECT SHIFT LEVER POSITION

(a) When shifting the shift lever to each position, make sure that it moves smoothly, and the position indicator displays correctly.

Positions which can be shifted without pressing the shift lever knob button R ^ N ^ D, L ^ 2 ^ D ^ N

Positions which can be operated only while pressing the shift lever knob button D ^ 2 ^ L, N ^ R ^ P

Positions which can be operated only while pressing the shift lever knob button, ignition switch ON and brake pedal depressed P ^ R

(b) Start the engine and make sure that the vehicle moves forward when shifting the lever from N to D position, and moves rearward when shifting to R position.

C95423

Ignition Switch Replacement 2004 Corolla

ADJUST SHIFT LEVER POSITION

Loosen the nut on the control shaft lever.

Push the control shaft fully downward.

Return the control shaft lever 2 notches to N position.

Set the shift lever to N position.

While holding the shift lever lightly toward the R position side, tighten the shift lever nut.

Torque: 12 Nm (122 kgfcm, 9 ftlbf)

Start the engine and make sure that the vehicle moves forward when shifting the lever from N to D position and moves rearward when shifting it to R position.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment