Charcoal Canister Assy

(a) Visually check the charcoal canister for cracks or damage.

Toyota Charcoal Canister Test Corolla

(b) Inspect the charcoal canister operation.

(1) Plug the vent port with the cap.

(2) While holding the purge port closed, blow air (1.76 kPa, 18 gf/cm2, 0.26 psi) into the EVAP port and check that air flows from the air drain port.

Air Inlet Port Purge Port

A63970

(3) While holding the purge port and the air drain port closed, blow air (1.76 kPa, 18 gf/cm2, 0.26 psi) into the EVAP port and check that air does not flow from the air inlet port.

A63970

2002 Celica Charcoal Canister Evap

(4) Apply vaccum (3.43 kPa, 25.7 mmHg, 1.01 in.Hg) to the purge port, check that the vacuum dose not decrease when the air inlet port is closed, and check that the vacuum decreases when the air inlet port is released.

(5) While holding the air inlet port closed, apply vacuum (3.43 kPa, 25.7 mmHg, 1.01 in.Hg) to the EVAP port and check that air flows into the purge port.

If operation is not as spacified, replace the charcoal canister.

(6) Remove the hose and cap from vent port.

Tacoma Vsv Purge

(c) Inspect VSV for Pressure Swiching Valve

(1) Using an ohmmeter, check that there is continuity between the terminals. Resistance: 37 - 44 Q at 20oC (68°F) If there is no continuity, replace the VSV.

(2) Using an ohmmeter, check that there is no continuity between each terminal and the body. If there is continuity, replace the VSV.

(3) Check that air does not flow from ports E to F.

Inspect Toyota Rav4 Canister

(4) Apply battery positive voltage across the terminals.

(5) Check that air flows from ports E to F. If operation is not as specified, replace the VSV.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment