(a) Disconnect the EVAP line hose from the charcoal canister.
(1) Pinch portion A.
(2) Pull out the connector.
(b) Pressurize and make the internal pressure in the fuel tank 4 kPa (41 gf/cm2, 0.58 psi).
(c) Check that the internal pressure of the fuel tank can be hold for 1 minute.
(d) Check the connected portions of each hose and pipe.
(e) Check the installed parts on the fuel tank.
If there is no abnormality, replace the fuel tank and filler pipe.
(f) Reconnect the EVAP line hose to the charcoal canister.
Was this article helpful?