Inspect Front Seat Inner Belt Assy Lh

(a) When fastening the seat belt (buckle switch ON).

(1) Inspect the continuity and resistance between the terminals. Standard:

B59902

Terminal No.

Specified condition

BS-i o B6-2

1,330 Q

BS-i o B6-3

No continuity

B6-4 o 2

Continuity

B6-5 o i

Continuity

If the result is not as specified, replace the inner belt.

Be nan

3

2

i

e

5

4

Connector (For Airbag Sensor)

Connector (For Airbag Sensor)

B59902

(b) When releasing the seat belt (buckle switch OFF).

(1) Inspect the continuity and resistance between the terminals. Standard:

Terminal No.

Specified condition

BS-i o B6-2

330 Q

BS-i o B6-3

Continuity

B6-4 o 2

Continuity

BS-5 o i

Continuity

Connector (For Occupation Detection Sensor)

"to

B59296

If the result is not as specified, replace the inner belt. 2. INSPECT FRONT SEAT INNER BELT ASSY RH

(a) Short between connector terminals 1 and 2 for the occupation detection sensor (seat is occupied).

B59296

(b) When fastening the seat belt (buckle switch is ON and seat is occupied).

(1) Inspect the continuity between the terminals of the connector for the warning switch. Standard:

Terminal No.

Specified condition

B7-3 o B7-4

Continuity

B7-i o B7-4

No continuity

p B59297

(c) When releasing the seat belt (buckle switch is OFF and seat is occupied).

(1) Inspect the continuity between the terminals of the connector for the warning switch. Standard:

Terminal No.

Specified condition

B7-3 o B7-4

Continuity

B7-1 o B7-2

Continuity

Connector (For Occupation Detection Sensor)

B59296

(d) Disconnect the occupation detection sensor connector (seat is not occupied).

B59297

(e) When fastening the seat belt (buckle switch is not ON and seat is occupied).

(1) Inspect the continuity between the terminals of the connector for the warning switch. Standard:

Terminal No.

Specified condition

B7-3 o B7-4

No continuity

B7-1 o B7-2

No continuity

B59297

(f) When releasing the seat belt (buckle switch is not OFF and seat is occupied).

(1) Inspect the continuity between the terminals of the connector for the warning switch. Standard:

Terminal No.

Specified condition

B7-3 o B7-4

No continuity

B7-1 o B7-2

Continuity

If the result is not as specified, replace the inner belt.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment