Install Transmission Clutch Hub No

(a) Using SST and a press, install the transmission clutch hub No.2 to the input shaft. SST 09316-60011 (09316-00021)

(b) Select a snap ring from the table below that will make the thrust clearance of the transmission clutch hub No.2 below 0.1 mm (0.0039 in.). Snap ring thickness:

Mark

Thickness: mm (in.)

Mark

Thickness: mm (in.)

0

2.30 (0.0906)

3

2.48 (0.0976)

1

2.36 (0.0929)

4

2.54 (0.1000)

2

2.42 (0.0953)

5

2.60 (0.1024)

(c) Using a brass bar and a hammer, tap in the snap ring. NOTICE:

Take care not to damage the journal surface of the input shaft.

(c) Using a brass bar and a hammer, tap in the snap ring. NOTICE:

Take care not to damage the journal surface of the input shaft.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • carolyn
    How to install transmission toyota corolla?
    8 years ago

Post a comment