9 Loosen the nut on the manual selector lever at the transmission (see illustration 5.1a).

10 Push the lever toward the right side of the vehicle until it stops, then return it two notches to the Neutral position.

11 Move the selector lever inside the vehicle to the Neutral position.

12 While holding the lever with a slight pressure toward the Reverse position, tighten the nut securely.

13 Check the operation of the transmission in each selector lever position (try to start the engine in each gear - the starter should operate in the Park and Neutral positions only).

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment