1 If the engine will start with the selector lever in any position other than Park or Neutral, adjust the neutral start switch.
2 Apply the handbrake and block the rear wheels. Raise the front of the vehicle and place it securely on axle stands (see Jacking and vehicle support). Shift the transmission into Neutral.
8.6 Remove the transmission-to-engine bolts (arrowed). Right-hand side bolt secures the starter motor on Non-VVT-i models
6.15 Rotate the switch until the neutral basic line aligns with the groove and tighten the bolts
7 If the switch continuity is not as described, renew it.
Was this article helpful?