Adjustment

6 Following refitting, make sure the door in aligned properly. Adjust it if necessary as follows:

a) Up-and-down and forward-and-backward adjustments are made by loosening the hinge-to-body bolts and moving the door as necessary. A special offset tool may be required to reach some of the bolts (see illustration).

b) In-and-out and up-and-down adjustments are made by loosening the door side hinge bolts and moving the door as necessary. A special offset tool may be required to reach some of the bolts (see illustration).

c) The door lock striker can also be adjusted both up-and-down and sideways to provide a positive engagement with the locking mechanism. This is done by loosening the screws and moving the striker as necessary (see illustration).

13 Door inner trim panel removal and refitting

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment