ZZFE and ZZFE engines

11 Remove the auxiliary drivebelt as described in Chapter 1.

12 Disconnect the power steering pressure switch wiring plug, then undo the union and disconnect the pressure hose from the pump

(see illustration).

13 Release the clamp and disconnect the fluid return hose from the pump (see illustration).

14 The pump is secured to the engine block by two bolts. Working through the gap in the drive pulley, undo the nuts and pull the bolts from the pump and bracket. Remove the pump.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment