Vane Air How Meter Electrical Circuit

The sensor movable contact is attached to the measuring plate and rides on a fixed resistor wired between the reference voltage input and the ground. As the volume of air entering the engine increases, the movable contact moves across the fixed resistor, causing a change in signal output voltage.

There are two designs of vane air flow meters used on Toyota L type EFI systems. The first design generates a signal which varies from low voltage at low air volumes to high voltage at high air volumes. The second design sensor has opposite signal characteristics. These sensors also operate on different reference voltages. Both sensor designs integrate an intake air temperature sensor into the air flow meter.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook

Post a comment