(c) Using a plastic-faced hammer, tap out the compressor housing. v.
Remove the compressor housing as straight as possible and do not make the impeller wheel interfere with the compressor housing.
8. REMOVE BEARING HOUSING '
(a) Place the matchmarks on the V-band, turbine housing and bearing housing.
I UHHUCrtMWfWWl, - TUR80CHARGER
(c) Using a plasticrfaced hammer, tap out the bearing housing.
Remove the bearing housing as straight as possible and so not make the turbine wheel interfere with the turbine hous-ing. ,
(d) Remove the snap ring from the turbocharger.
(e) Remove the O-ring from the bearing housing.
-rij ebiani ftib nocheo erii lis svomai ,rleu^d ei»w g on«sU (d)
Was this article helpful?