X

Specified clearance:

Follow the disassembly procedures in the reverse order.

Fig.6-5 Checking Backlash X5042

6. Measure the space between the gear, and straight-edge with a feeler gauge . Lay the straight-edge on the pump cover, and measure

1. After assembly, check the gears for free movement.

2. After the assembly is completed, submerge the oil pump inlet pipe in a container filled with clean engine oil, then rotate the oil pump shaft, and check if the oil flow out from the outlet port.

The limit of backlash is (0.037").

Limit 0.95mm (0.037"

Fig.6-5 Checking Backlash X5042

The limit of backlash is (0.037").

Limit 0.95mm (0.037"

Installation

Follow the removal procedures in the reverse order.

When installing the oil pan, the oil pan gasket should be used new one. Run the engine, and check for oil leak.

Was this article helpful?

0 0

Post a comment