Disassemble Wheel Cylinder

Remove the following parts from the wheel cylinder:

7. IF NECESSARY, REMOVE AND DISASSEMBLE PARKING BRAKE BELLCRANK ASSEMBLY

(a) Remove the clip and disconnect the parking brake cable.

(b) Remove the two tension springs.

(c) Remove the parking brake bellcrank assembly with the two bolts.

(d) Remove the boot from the parking brake bellcrank assembly.

(e) Using a screwdriver, remove the C-washer and pin.

(f) Remove the parking brake bellcrank from the crank bracket.

Was this article helpful?

0 0

Responses

  • Mirin
    How to disassemble wheel cylinder?
    8 years ago

Post a comment